+44 (0)8700 340 002 sales@imtex-controls.com

Same Technical Performance for Harsher Environments

Camtorc Extreme Service Actuators (Type SX & CX)

Camtorc actuators are specified and operate in some of the World’s most critical and demanding applications as found in the oil and gas, energy and marine industries.

Camtorc Extreme Services Actuators, offer the same innovation and reliability found in all Camtorc actuators, but with the technical performance to operate in the harshest and most demanding environments.


Features and Benefits

Cam Design
The unique cam design offers a highly efficient and simple, backlash free operation providing extended life of seals and components

High Integrity Construction
Constructed in 316 (CF8M) stainless steel and fully tested on assembly to provide superior operational life

Full Torque Output
The pneumatic spring return version at the beginning of the spring stroke has a 15% increase in torque output, providing extra power for the break torque and at the end of the spring, the torque output is the same as that of the double acting variant of the actuator

Compact Dimensions
The high torque output of the pneumatic spring return version allows for the use of smaller size actuators than is the case with conventional actuator designs

Long Spring Life
All springs are stress relieved after forming to ensure a long life

Whole Life Cost
Camtorc actuators are exceptionally low wearing providing low maintenance and the optimum Whole Life Cost solution for the customer

The Extreme Actuator Design includes:

0° to 95° rotation with adjustable end stops

Torque Range
Double Acting: 10 to 30,000 Nm / Spring Return: 10 to 20,000 Nm (Spring End)

Supply Pressure Range
Pneumatic Actuators: 2 to 10 barg*/ Hydraulic Actuators: Low – 3 to 10 barg*/High -10 to 210 barg* (*Routine overpressure test of 1.5 times the maximum operating pressure)

Ambient Temperature Range
Nitrile Seals: -20°C to +60°C (T6)/ Viton Seals: -20°C to +130°C (T3)/EPDM 70 Seals: -40°C to +130°C (T4). Optional – High (+170°C)/low (-45°C) temperature versions available on request

Ingress Protection  
Weatherproof to IP65/66

Hazardous Certification
ATEX II 2 G IIC c T*. (*Dependent on seal materials)